2025 Altair Enlighten Award Winners Announced

Lucid, Mercedes-Benz AG, AkzoNobel, and other industry leaders recognized for creating a lighter, more sustainable automotive future 

TROY, Mich., Sept. 16, 2025 /PRNewswire/ -- Altair, a global leader in computational intelligence, has named the winners of the 2025 Altair Enlighten Award. Presented in association with the Center for Automotive Research (CAR), the award honors the greatest sustainability and lightweighting advancements that successfully reduce carbon footprint, mitigate water and energy consumption, and leverage material reuse and recycling efforts. 

"In a rapidly transforming automotive landscape, organizations must continuously push the boundaries of sustainability innovation. Throughout its 13-year history, the Enlighten Award remains the premier honor showcasing the automotive industry's most groundbreaking achievements in sustainable technology," said Sam Mahalingam, chief technology officer, Altair. "We are proud to once again celebrate the organizations driving a more sustainable future."

"The Altair Enlighten Award represents the type of leadership our industry needs—bold, practical solutions that move us closer to a sustainable future," said Elizabeth Krear, president and CEO, Center for Automotive Research. "At CAR, we see this award as a natural extension of our mission to convene stakeholders, highlight transformative research, and advance the technologies that will define tomorrow's mobility. Together with Altair, we are shining a light on the innovations that will guide the road ahead—and today, we celebrate the winners who are setting a powerful example for the entire industry."

Below is the complete list of all winning organizations, runners-up, and honorable mentions.

Future of Lightweighting
Winner: Vortex CAE – Enlighten™: A Novel Holistic Topometry Based Optimizer for the Design of Lightweight Crash Structures

• Vortex CAE's new solver offers direct crash and impact optimizations using full fidelity models. The outputs produce holistic and pre-validated CAE solutions. Additionally, they developed a computationally efficient 3D generative-design methodology to identify and size fundamental structural features early on. A generative design case study cut 77% from the body-in-white mass while meeting or exceeding structural performance in 13 primary crash load cases. Assuming a 50% mass-retention loss, they estimate that $500 million in raw material costs for this vehicle could have been saved, along with 1.35 million tons of C02 from manufacturing alone. 

Runner-up: Magna– Hemp-PA6 Composite Roof Rack Inner

• Magna successfully demonstrated the use of Hemp Nylon (PA6) in automotive exteriors, enhancing sustainability. The new sustainable material replaces talc in traditional nylon resin and was developed in collaboration with BASF and Heartland. The lightweight, renewable material absorbs CO₂ during growth, supports decarbonization, and delivers performance and processing equivalent to the original resin, marking a major advancement in the use of natural fibers for automotive applications.

Enabling Technology
Winner: CompositeEdge GmbH and ATA Mute B.V. – Adaptive Ultra-Thin Noise Solution

• CompositeEdge GmbH and ATA Mute B.V. have developed an acoustic element under 1 mm thick that offers up to 97% sound absorption, particularly at low frequencies where conventional materials are less effective. It is waterproof, fire-resistant, and fully recyclable, produced without adhesives from natural, carbon, or glass fibers combined with thermoplastics. The material maintains its performance in humid and high-temperature environments and is suitable for a wide range of applications such as cars, heat pumps, and interior facades.

Runner-up: Lucid – Modal Transient Analysis Based Durability CAE Workflow               

• Lucid, in collaboration with the Altair® OptiStruct® development team, developed and implemented a seamless durability CAE workflow that progressed from MBD-based vehicle dynamics simulation to FEM-based strength, stiffness, and fatigue analysis, and ultimately to structural optimization. The workflow could be applied to a wide range of components, including the body-in-white, subframes, battery pack, suspension components, powertrain, and closures, using a Global-Local Analysis approach for detailed local assessments with refined meshing.

Honorable Mention: Mercedes-Benz AG & Mercedes-Benz Research and Development India Private Limited – An Automated Sustainable Process for Generating Superelements

• This fully automated process streamlines setup to just 15 minutes for complex parts, eliminates user errors, and requires no manual intervention. This innovation enables agile, iterative optimizations with fast design feedback, while cutting computational demands, achieving over 90% runtime reduction, lower hardware utilization, and more efficient resource use.

Module Lightweighting 
Winner: Syensqo and Geely – Amodel® PPA Stator Cooling System

• Geely improved e-motor efficiency with an innovative stator cooling design using Syensqo's Amodel® PPA, achieving 47% weight and 36% cost savings versus metal. The metal-to-plastic conversion reduces weight, enables part integration, and streamlines high-volume assembly through injection molding, laser welding, and snap fits. Highly resistant to automotive fluids, Amodel® PPA retains nearly 70% burst pressure resistance after 2,000 hours of aging at 150℃ ATF, ensuring safety, and reliability. This innovative design achieves precise lubrication with lower oil pump power consumption, effectively reducing the risk of overheating spots.

Runner-up: American Axle & Manufacturing (AAM)– Modular Lightweight Axle Housing Innovation

• AAM's modular lightweight axle housing innovation replaced two axle configurations with a single, modular design, cutting complexity and cost. Delivering up to 10% mass reduction, around 1.3 million pounds annually across 145,000 units, the design was optimized using Altair's Multi-Model Optimization to balance weight and strength. Fully compatible with existing assembly lines and preserving back-serviceability, the solution reduces fuel consumption and emissions through material efficiency and streamlined logistics.

Sustainable Computing 
Winner: Lucid – Design-Driven Structural Assessment To Enable Accelerated Product Development

• Lucid's Design-Driven Structural Assessment approach accelerates product development using Altair SimSolid®'s meshless solver. Engineers can run rapid design iterations directly within their CAD environment, eliminating the need for complex meshing or switching tools. The highly customizable workflow streamlines setup and empowers teams to optimize designs with greater speed and ease.

Runner-up: Mercedes-Benz AG & Mercedes-Benz Research and Development India Private Limited – An Automated Sustainable Process for Generating Superelements     

• This fully automated process streamlines setup to just 15 minutes for complex parts, eliminates user errors, and requires no manual intervention. This innovation enables agile, iterative optimizations with fast design feedback, while cutting computational demands—achieving over 90% runtime reduction, lower hardware utilization, and more efficient resource use.

Sustainable Process 
Winner: Marelli – Adhesive Wastewater Recovery Solution

• Marelli implemented a cleaning process for adhesive manufacturing equipment, such as robots and spray guns, utilized in bonding topcoat skins to substrates for cut, sew, and wrap parts. By using a three-part chemical agent, the process separates adhesive waste from the cleaning water, enabling recovery and reuse of approximately 85% of adhesive wastewater. This process reduced the plant's water consumption by 8,160 kilograms annually, with the recovered non-potable water able to be reused within manufacturing operations.

Runner-up: CITIC Dicastal Co., Ltd. – Key Technology for Integrated Forming of Large Aluminum Alloy Structural Components

• This innovation consolidates 98 parts into a single component, reducing weight by 30% and lowering both cycle time and cost. It marks the first application of a non-heat-treated Al-Mg alloy in commercial vehicle structures. A closed-loop thermal balance system ensures consistent forming quality, while rapid process simulation and C123 variable cross-section design optimize material usage and accelerate the design-to-validation cycle.

Sustainable Product
Winner: NIO and AkzoNobel – Bottom Plate Coating for Battery Pack to Improve Lifespan During Battery Swap for Electrical Vehicles

• NIO and AkzoNobel extended the lifespan of the bottom plate coating from 5 to 15 years while reducing coating thickness by 90%, cutting vehicle weight by 2.2 kg, and pioneering powder coating technology for electric vehicles. The innovation replaced non-recyclable materials with recyclable alternatives, eliminated VOC emissions, and improved coating efficiency by 55%, delivering significant sustainability benefits. Established through a unique car maker–tier 5 partnership, this scalable solution enhanced cost and efficiency across tiers 1 to 3 and has been mass-produced since November 2024, applied widely on NIO, Onvo, and Firefly EV models.

Runner-up: Chery Automobile Co., Ltd. – Answering Earth with Low-Carbon Recycled Aluminum

• Chery Automobile's low-carbon aluminum initiative uses 100% recycled aluminum in a closed-loop system with over 99% impurity removal and employs heat-treatment-free integrated die-casting, cutting manufacturing energy by up to 95%. Achieving over 80% reduction in raw-material carbon emissions, it meets global low-carbon standards while maintaining strength and safety, and fosters collaborative ecosystems for scalable green manufacturing.

Responsible AI
Winner: Lucid – Predicting Crash Modes with Altair® PhysicsAI™ 

• Lucid transformed crash CAE by applying AI-driven insights to predict complex, non-linear deformation behaviors under realistic off-axis and oblique impact scenarios. By integrating Altair PhysicsAI with LS-DYNA, they trained surrogate models to classify crash modes, such as axial crush and bending, well before physical testing. This approach reduced design iterations, minimizing prototype reliance, and accelerating delivery of lightweight, crash-robust structures with high safety confidence. This scalable methodology was applied across multiple crash-critical components and contributed to sustainability by minimizing material use, reducing test waste, and supporting corporate decarbonization goals.

Runner-up: Lucid – Agentic AI For Engineering Automation

• Lucid automated CAD data retrieval, custom script execution, analysis, and reporting by implementing AI-driven natural language support, which eliminated the need to learn each individual tool. By simply stating broad concepts, the AI handled intricate details and seamlessly chained multiple applications, allowing data to flow automatically through the workflow pipeline. This approach enabled instant execution of ideas without waiting for manual intervention and avoided complex API use by automating interactions directly through the GUI.

As the automotive industry accelerates demand for safer, more efficient, and innovative products, Altair empowers transformation with AI-powered engineering, high-performance computing (HPC), and optimization across the entire product lifecycle. By enabling customers to reduce environmental impact, Altair's software and consulting services are helping shape a healthier, more sustainable future. To learn more, visit https://altair.com/sustainability.

The Enlighten Award winners will be announced in an awards ceremony at the CAR Management Briefing Seminars in Detroit, Michigan on September 16, 2025. For more information about the Enlighten Award, visit www.altair.com/enlighten-award.

Partners for the 2025 Enlighten Award include Auto Bild Japan, Autocar Professional, Automobil Industrie, Auto Messe Web, Auto Messe Web Worldwide, Center for Automotive Research, Google Cloud, Korean Society of Automotive Engineers (KSAE), SAE Automotive Engineering, and Tech Briefs.

About Altair
Altair is a global leader in computational intelligence that provides software and cloud solutions in simulation, high-performance computing (HPC), data analytics, and AI. Altair is part of Siemens Digital Industries Software. To learn more, please visit www.altair.com or sw.siemens.com.

 

 

 

 

 

 

 

 

Photo - https://mma.prnewswire.com/media/2772981/Altair_EnlightenAward25_Winners.jpg
Photo - https://mma.prnewswire.com/media/2773442/Altair_NR_Enlighten_Award_2025_Winner_Responsible_AI.jpg
Photo - https://mma.prnewswire.com/media/2773443/Altair_NR_Enlighten_Award_2025_Winner_Sustainable_Process.jpg
Photo - https://mma.prnewswire.com/media/2773444/Altair_NR_Enlighten_Award_2025_Winner_Sustainable_Product.jpg
Photo - https://mma.prnewswire.com/media/2773445/Altair_NR_Enlighten_Award_2025_Winner_Enabling_Technology.jpg
Photo - https://mma.prnewswire.com/media/2773447/Altair_NR_Enlighten_Award_2025_Winner_Future_of_Lightweighting.jpg
Photo - https://mma.prnewswire.com/media/2773448/Altair_NR_Enlighten_Award_2025_Winner_Module_Lightweighting.jpg
Photo - https://mma.prnewswire.com/media/2773449/Altair_NR_Enlighten_Award_2025_Winner_Sustainable_Computing.jpg 
Logo - https://mma.prnewswire.com/media/1421069/Altair_Logo.jpg

 

View original content:https://www.prnewswire.co.uk/news-releases/2025-altair-enlighten-award-winners-announced-302558271.html